BrassCraft ProCoat® 3/4 in. ID with 3/4 in. Female Iron Pipe inlet x 3/4 in. Push Connect with Ball Valve outlet stainless steel connector. Used to connect the water supply to your water heater, this connector delivers outstanding flexibility with advanced corrosion resistance, both inside and outside. BrassCraft’s patented integrated dielectric sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. In addition, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs.

• Corrugated stainless steel tube
• (3/4 in. ID) 3/4in. FIP x 3/4 in. Push Connect
• Use to connect water supply to water heater
• Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
• Full flow, maximum performance with a 3/4" in. internal diameter
• Exclusive ProCoat® clear coat, provides corrosion resistance to deterioration from most common household chemicals, UV rays and salt
• Integrated dielectric sleeve isolates dissimilar metals within the waterway to help protect the connector from internal corrosion
• Requires less torque to seal with a pliable nitrile rubber washer, especially on rough nipple surfaces
• Stainless steel finish
• Engineered and tested for harsh water conditions
• Indoor
• Temperature rating: 40° to 180° F
• Pressure rating: 125 PSI maximum
• No-lead certified
• CSA and IAPMO certified